Conductor Stranding Fundamentals
Power cord conductors are made of multiple fine copper wires twisted together, known as stranded conductors. This stranding provides the flexibility essential for cords that must bend, coil, and flex during use. The degree of flexibility depends on the number of individual strands and their individual diameter—more strands of finer wire produce a more flexible conductor. Zhejiang Jinting Nuclear Cable Co., Ltd. manufactures power cords with conductors conforming to IEC 60228 flexibility classes.
IEC 60228 Flexibility Classes
| Class | Description | Application | Example (1.5mm²) |
|---|---|---|---|
| Class 1 | Solid conductor | Fixed building wiring | 1 solid wire |
| Class 2 | Stranded (rigid) | Fixed wiring, minimal flexing | 7 strands × 0.52mm |
| Class 5 | Flexible | Power cords (standard) | 30 strands × 0.25mm |
| Class 6 | Extra-flexible | Welding cables, test leads | 84 strands × 0.15mm |
Class 5: The Power Cord Standard
Almost all power cords use Class 5 flexible conductors. This class provides adequate flexibility for repeated handling and coiling while maintaining good electrical performance and mechanical strength. Class 5 conductors for power cord applications include 32 strands × 0.20mm for 1.0mm², 30 strands × 0.25mm for 1.5mm², and 50 strands × 0.25mm for 2.5mm². The ‘F’ in cable designations like H05VV-F or H07RN-F specifically indicates Class 5 flexible conductors are used.
How Stranding Affects Performance
Conductor stranding influences several performance characteristics. Finer stranding increases flexibility and improves flex life (more bending cycles before conductor breakage), but slightly reduces conductivity per unit cross-section due to increased inter-strand air gaps. Very fine stranding can increase cost and may be more difficult to terminate reliably. At Jinting, conductor strand count and diameter are optimized for each cable type to balance flexibility, conductivity, cost, and termination reliability for the intended application.
Tinned vs. Bare Copper Strands
Power cord conductors may use bare copper or tinned copper strands. Tinned copper (coated with a thin layer of tin) provides improved corrosion resistance, better solderability, enhanced resistance to chemical attack from certain rubber compounds, and slightly reduced conductivity (negligible effect in power applications). Bare copper offers slightly lower cost and marginally better conductivity, and is commonly used in PVC-insulated cords where corrosion is less of a concern. Zhejiang Jinting Nuclear Cable Co., Ltd. uses both bare and tinned copper as appropriate for each cable type and applicable standards.
Stranding and Crimp Termination
The stranding configuration affects how well the conductor can be terminated in crimp terminals. Finely stranded conductors require crimp terminals and tooling designed for Class 5/6 flexibility—using terminals designed for Class 2 conductors may result in poor crimp quality. Crimping too hard can cut individual strands, while insufficient crimping may result in poor mechanical and electrical connection. Jinting’s automated crimping processes are optimized for the specific stranding configuration of each cable type to ensure reliable terminations.
Looking for High-Quality Power Cords?
Zhejiang Jinting Nuclear Cable Co., Ltd. is a leading manufacturer of certified power cords, plugs, sockets, and cable assemblies. Contact us at sales@jintingnuclearcable.com for inquiries.


