Why Pull Testing Matters
Pull force testing verifies the mechanical integrity of the connection between the cable and the molded plug or connector. It ensures that the strain relief adequately grips the cable so that pulling on the cord does not transfer stress to the electrical connections inside the plug, which could cause conductor breakage, short circuits, or exposed live parts. Zhejiang Jinting Nuclear Cable Co., Ltd. performs pull testing as part of quality assurance for every product type.
Pull Test Standards and Requirements
Different standards specify slightly different pull test methods and force requirements. UL 817 (US): 30 lbf (133N) for 15 minutes, then increased to 40 lbf (178N) for 1 additional minute. Cord must not separate from plug by more than specified displacement (typically 2mm maximum). IEC 60320 (international): 60N for cords rated up to 10A, 100N for cords over 10A, applied for 25 cycles (each cycle: pull for 1 second, release). AS/NZS 3112 (Australia/NZ): Similar to IEC with some variations. VDE (Germany): Deutsche specific requirements with thermal conditioning prior to testing.
Test Procedure at Jinting
At Zhejiang Jinting Nuclear Cable Co., Ltd., pull testing is conducted on samples from each production batch. The plug body is clamped securely in the test fixture fixture, preventing movement. A controlled tensile force is applied to the cable at the specified distance from the plug face. The force is applied in the direction most likely to cause failure (typically along the cable axis or at an angle). Displacement between the cable jacket and the plug body is monitored. After the test, the plug is examined for signs of internal damage, and all samples undergo subsequent electrical testing to verify no conductor damage occurred.
Acceptance Criteria
A pull test is considered passed when: the displacement between the cable jacket and plug body does not exceed the specified limit, the strain relief shows no evidence of rupture or cracking, electrical testing after the pull test confirms all conductors remain intact and properly connected, and visual inspection reveals no damage that could compromise safety. Our quality records track pull test results over time to identify any trends that might indicate process changes requiring attention.
Beyond Pull Testing: Flex Testing
In addition to pull testing, flex testing evaluates the cord’s ability to withstand repeated bending at the plug-cable junction. A typical flex test involves swinging the cable through a 90° arc with a specified weight attached, for thousands of cycles. This simulates years of normal use. Zhejiang Jinting Nuclear Cable Co., Ltd. conducts flex testing to verify long-term durability, complementing pull testing for comprehensive mechanical validation.
Looking for High-Quality Power Cords?
Zhejiang Jinting Nuclear Cable Co., Ltd. is a leading manufacturer of certified power cords, plugs, sockets, and cable assemblies. Contact us at sales@jintingnuclearcable.com for inquiries.


